Furniture polishing service
Scratches, water rings, heat marks and dull, sticky or patchy finishes are carefully removed and replaced with a finish suited to how the piece is used, from hand-rubbed French polish to tough PU lacquer.
Why polishing matters
Every wooden surface relies on its finish to keep out moisture, heat, stains and wear. When the finish breaks down, the timber underneath starts to dry, crack and discolour. Polishing restores that protective layer while bringing back the natural beauty of the grain.
Depending on condition, we either revive the existing finish with cleaning, cutting back and re-coating, or strip it completely and rebuild from bare wood.
Finishes we offer
Best for
Antiques, display pieces, fine veneers
Look
Deep, warm, glass-like
Shellac applied by hand in dozens of thin layers. Beautiful and repairable, but needs coasters and gentle care.
Best for
Dining tables, desks, kitchen units
Look
Matte, satin or gloss
Polyurethane builds a hard, water- and heat-resistant film. Ideal for high-use surfaces in busy homes and offices.
Best for
Wardrobes, cabinets, beds
Look
Even satin sheen
A fast-curing lacquer for large furniture where an even, practical finish matters more than maximum durability.
Best for
Rustic, solid wood, outdoor pieces
Look
Natural, low sheen
Penetrating oils feed the wood and are easy to refresh. Wax adds a soft hand-feel and gentle glow.
Best for
Modern or colour-change projects
Look
Solid colour
Spray-applied primer and colour coats for a smooth, opaque finish in a shade you choose.
Our polishing process
Aftercare
Hot and wet items are the main cause of rings and white marks on any finish.
Strong sunlight fades colour and dries timber. Rotate items and use curtains where possible.
Use a soft, slightly damp microfibre cloth. Avoid silicone sprays that build up over time.
New finishes keep hardening for up to two weeks. Go easy on heavy use during that time.
Questions & answers
Straight answers to the questions people ask us most before booking. If yours is not here, call or message us and a technician will help.
Yes, for fixed or very large pieces we offer on-site polishing using low-odour products and dust control. Full strip-and-refinish work is best done in the workshop.
Light scratches disappear during cutting back. Deep scratches and dents are filled or steamed out and colour-matched before the new finish goes on.
Yes. After stripping, timber can be stained lighter or darker within the limits of the wood, or finished in an opaque colour with Duco.
Most pieces can be used gently within 24 to 48 hours of delivery. The finish reaches full hardness over the following one to two weeks.
Related services
Free assessment
Tell us about the piece and the look you want. We will recommend a finish and send a written estimate.
